Open the cabinets in a 1950s Rose Park rambler, a 1960s Millcreek split-level or a 1980s two-story out in the valley and you will usually find the same thing: solid, square, functional boxes wearing a finish that went out of style two decades ago. Honey oak, orange-toned maple, dark walnut stain, maybe brushed-on paint from a previous owner that is chipping at the handles.
The kitchen works. It just looks tired. So the question becomes whether to paint it, reface it, or tear it out. Here is how the three options compare for Salt Lake City kitchens on cost, timeline and results.
Why So Many Salt Lake Kitchens Are Candidates for Painting
Salt Lake City has the oldest housing stock on the Wasatch Front, with a median build year of 1965. Rose Park went up from 1947, most of Millcreek and Holladay date to 1950–1979, and the valley suburbs filled in through the 1990s. Builders in those decades mostly used real wood: oak, maple, birch and alder doors on plywood or particleboard boxes.
Real wood is exactly what a cabinet painter wants: heavy doors, square frames, and a surface that takes primer and enamel well once prepped. There is also a money reason. With Salt Lake starter and mid-tier homes trading in the low-$400,000s to mid-$500,000s, a replacement that often runs well into five figures is a big bite. Painting gets the look of a new kitchen for a fraction of that.
Refinish, Reface or Replace: The Three Options Side by Side
Refinishing (cabinet painting)
Doors and drawer fronts come off, everything is degreased, scuff-sanded, bonding-primed and sprayed with two coats of cabinet-grade enamel, then reinstalled. National cost surveys put professional refinishing roughly in the $2,000 to $4,500 range for a typical kitchen, with an average around $3,100. Local cost guides have listed Salt Lake per-door rates of about $70 to $90, so a 30-door kitchen lands in the same neighborhood. Large kitchens, islands, grain-filling oak or a second color push the number up.
Refacing
The boxes stay, but every door and drawer front is replaced and the exposed frames and end panels get matching veneer. Refacing typically runs $4,300 to $10,000 and gives you a new door style on old boxes. It fits when you dislike the door profile itself, not just the color.
Full replacement
Stock cabinets start around $5,000 for a small kitchen, and semi-custom or custom replacement commonly runs well into five figures once you add demolition, new countertops (old ones rarely survive removal), plumbing, electrical and flooring patches.
The headline: refinishing usually costs one-third to one-half of refacing and a small fraction of replacement, and it skips the demolition, dust and weeks without a kitchen.
Which Cabinets Are Good Candidates
Not every cabinet should be painted. Here is how we sort them:
- Solid wood doors (oak, maple, birch, alder, cherry): Excellent. Maple and birch give the smoothest result. Oak’s open grain shows through paint unless it is filled, which adds labor.
- MDF or wood-veneer doors: Very good. MDF shaker doors finish flawlessly because there is no grain and no movement.
- Previously painted cabinets: Usually fine if the old paint is bonded. Peeling coats come off to a sound layer first, and on pre-1978 homes the old paint should be tested for lead, since disturbing it triggers EPA lead-safe practices.
- Laminate doors: Doable with the right bonding primer, but only as good as the laminate’s grip on the core. Lifting edges are a warning sign.
- Thermofoil doors: Intact thermofoil can be primed and painted. Thermofoil peeling at the corners or bubbling near the dishwasher and oven cannot be fixed with paint; those doors are better replaced.
- Swollen particleboard: Boxes or toe-kicks that have soaked up water under a sink are a replacement item, not a paint item.
A kitchen that is mostly good wood with one or two problem doors is still a paint job; we replace those doors first.
What the Process Looks Like, Day by Day
A professional refinish is a different animal from brushing wall paint onto doors over a weekend. The products are cabinet-grade enamels, usually waterborne alkyds or urethane-modified acrylics that cure to a hard, scrubbable shell, and they are sprayed. A typical week:
- Day 1, removal and prep. Doors, drawer fronts and hardware come off and get labeled. Boxes are masked and the kitchen is tented in plastic. Every surface is degreased, because years of cooking oil are the number-one cause of paint failure on cabinets, then scuff-sanded and filled.
- Day 2, priming. A bonding primer goes on the boxes in place and on the doors in a spray booth in the garage or at a shop. Shellac-based or specialty primers handle slick surfaces; standard bonding primers handle bare or stained wood.
- Days 3 and 4, finish coats. Two coats of enamel with light sanding between. Recoat times range from a few hours for some urethane enamels to overnight for waterborne alkyds, which is why four or five days is realistic and two is not.
- Day 5, reinstall. Doors go back on, hinges get adjusted, new pulls go in, masking comes down and we walk the kitchen with you.
The sink and fridge usually stay usable, and most families set up a temporary counter in the dining room for the week.
The 30-Day Cure (and Why It Matters)
Enamel is dry to the touch in an hour or two and can be handled the next day, but it is not fully hard for about 30 days. During that window the finish can still dent from a hard knock or take an imprint from something leaning against a door. Treat the kitchen gently for the first one to two weeks: no wet dish towels over doors, no slamming, no scrubbing. After a month it is as tough as it will get, and mild soap and a soft cloth are all it needs.
Utah’s dry air helps by speeding drying. The exception is winter, when a cold garage slows alkyd cure, so we keep spray spaces above 50 degrees or spray doors off-site.
Colors Salt Lake Homeowners Are Choosing
Whites are still more than half of all cabinet refinishes, and the trend has moved from stark, cool whites toward soft, warm whites and creams that suit the brick, wood floors and warm light in older Salt Lake homes. Next come muted sage and olive greens, navy, deep forest green and soft black, usually two-tone: light uppers with a darker island or lower run.
Satin is the most popular sheen because it cleans easily without showing every fingerprint; semi-gloss is a close second. If you are painting trim and doors elsewhere, we can match the cabinet color in the same enamel so the kitchen ties into the rest of your interior painting.
When Replacement Is the Better Call
We would rather say so up front. Replacement wins when:
- You want a different layout, more drawers, taller uppers or a new island.
- The boxes have swollen, sagged or separated at the joints, or the drawer boxes and glides are beyond fixing.
- The doors are peeling thermofoil across more than a few fronts.
- You are already replacing countertops and moving plumbing, so demolition is partly sunk cost.
Refinishing wins almost everywhere else: sound boxes, a layout you like, a budget that needs to stretch. You can see painted kitchens alongside whole-home work in our project gallery.
Getting a Clear Answer for Your Kitchen
Met House Painters is locally owned and operated, not a franchise, and we work on kitchens from the Avenues to Holladay and across the west side. A walk-through takes about 30 minutes: we check door material, box condition and the areas around the sink and dishwasher, then give you a written scope and price for cabinet refinishing in Salt Lake City, along with an honest opinion if replacement is the better buy. Many cabinet projects pair with a full home interior repaint, which is the most efficient time to do both.
FAQ
Can you paint oak cabinets without the grain showing?
Yes, with an extra step. Oak’s open grain telegraphs through paint, so for a smooth finish we apply a grain filler before priming and sand it flush. It adds a day and some cost; many homeowners skip it and accept a subtle wood texture, which looks natural with lighter colors.
Do I need to empty my cabinets?
Not completely. Doors and drawer fronts come off, but the boxes are masked and sprayed in place, so contents can usually stay put as long as they are pushed back from the openings. We do ask that countertops be cleared.
Will painted cabinets chip?
Properly degreased, sanded, bonding-primed and sprayed with cabinet enamel, a refinished kitchen should hold up for many years with normal use. Most chips we see come from skipped degreasing, wall paint used instead of enamel, or heavy use during the first week. Edges near the trash pull-out and dishwasher take the most abuse and may need a touch-up over time.
How long will I be without my kitchen?
Plan on about a week: typically three to five working days on site, then a few days of gentle use while the enamel hardens. The sink and refrigerator usually stay usable, and with no demolition there is no countertop or plumbing downtime.
If you are weighing paint against replacement, we are glad to look at your kitchen and give you a straight answer. Reach out to Met House Painters for a free consultation.
Ready to get started?
Met House Painters of Salt Lake City is locally owned and operated, not a franchise. Request a consultation and we'll walk your home with you and put together a clear, written proposal.